[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[security bulletin] HPESBHF03723 rev.1 - HPE Aruba ClearPass Policy Manager, using Apache Struts, Remote Code Execution
-----BEGIN PGP SIGNED MESSAGE-----
Note: the current version of the following document is available here:
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: hpesbhf03723en_us
HPESBHF03723 rev.1 - HPE Aruba ClearPass Policy Manager, using Apache Struts,
Remote Code Execution
NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.
Release Date: 2017-03-29
Last Updated: 2017-03-29
Potential Security Impact: Remote: Code Execution
Source: Hewlett Packard Enterprise, Product Security Response Team
A potential security vulnerability has been identified in HPE Aruba ClearPass
Policy Manager. The vulnerability could be remotely exploited to allow
execution of code.
**Note:** The ClearPass Policy Manager administrative Web interface is
affected by the vulnerability. ClearPass Guest, Insight, and Graphite are NOT
- CVE-2017-5638 - Apache Struts, remote code execution
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
- Aruba ClearPass Policy Manager All versions prior to 6.6.5
CVSS Base Metrics
Reference, CVSS V3 Score/Vector, CVSS V2 Score/Vector
Information on CVSS is documented in
HPE Customer Notice HPSN-2008-002 here:
HPE Aruba has provided hotfixes for ClearPass 6.6.5, 6.6.4, and 6.5.7. Use
one of the following methods to install the appropriate hotfix:
Install the Hotfix Online Using the Software Updates Portal:
1. Open ClearPass Policy Manager and go to Administration - Agents and
Updates - Software Updates.
2. In the Firmware and Patch Updates area, find the "ClearPass 6.5.7
Patch for CVE-2017-5638" or "ClearPass 6.6.4 Hotfix Patch for
patch and click the Download button in its row.
3. Click Install.
4. When the installation is complete and the status is shown as "Needs
Restart", proceed to restart ClearPass. After reboot, the status for the
patch will be shown as Installed. The ClearPass Policy Manager version
number will not change.
Installing the hotfix Offline Using the Patch File from
1. Download the "ClearPass 6.5.7 Hotfix Patch for CVE-2017-5638" or
"ClearPass 6.6.4 Hotfix Patch for CVE-2017-5638" patch from the Support
2. Open the ClearPass Policy Manager Admin UI and go to Administration -
Agents and Software Updates - Software Updates.
3. At the bottom of the Firmware and Patch Updates area, click Import
and browse to the downloaded patch file. The name and description once
imported may differ from the name and remark on the support site
as these were adjusted after posting. This is purely a cosmetic
4. Click Install.
5. When the installation is complete and the status is shown as Needs
proceed to restart ClearPass. After reboot, the status for the patch will
be shown as Installed. The ClearPass Policy Manager version number will
Restrict access to the Policy Manager Admin Web Interface. This can be
accomplished by navigating to Administration - Server Manager -
Server Configuration - Server-Name - Network - Restrict Access and
only allowing non-public or network management networks.
**Note:** Please contact HPE Technical Support if any assistance is needed
acquiring the software updates.
Version:1 (rev.1) - 29 March 2017 Initial release
Third Party Security Patches: Third party security patches that are to be
installed on systems running Hewlett Packard Enterprise (HPE) software
products should be applied in accordance with the customer's patch management
Support: For issues about implementing the recommendations of this Security
Bulletin, contact normal HPE Services support channel. For other issues about
the content of this Security Bulletin, send e-mail to security-alert@xxxxxxx.
Report: To report a potential security vulnerability for any HPE supported
Web form: https://www.hpe.com/info/report-security-vulnerability
Subscribe: To initiate a subscription to receive future HPE Security Bulletin
alerts via Email: http://www.hpe.com/support/Subscriber_Choice
Security Bulletin Archive: A list of recently released Security Bulletins is
available here: http://www.hpe.com/support/Security_Bulletin_Archive
Software Product Category: The Software Product Category is represented in
the title by the two characters following HPSB.
3C = 3COM
3P = 3rd Party Software
GN = HPE General Software
HF = HPE Hardware and Firmware
MU = Multi-Platform Software
NS = NonStop Servers
OV = OpenVMS
PV = ProCurve
ST = Storage Software
UX = HP-UX
Copyright 2016 Hewlett Packard Enterprise
Hewlett Packard Enterprise shall not be liable for technical or editorial
errors or omissions contained herein. The information provided is provided
"as is" without warranty of any kind. To the extent permitted by law, neither
HP or its affiliates, subcontractors or suppliers will be liable for
incidental,special or consequential damages including downtime cost; lost
profits; damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration. The
information in this document is subject to change without notice. Hewlett
Packard Enterprise and the names of Hewlett Packard Enterprise products
referenced herein are trademarks of Hewlett Packard Enterprise in the United
States and other countries. Other product and company names mentioned herein
may be trademarks of their respective owners.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
-----END PGP SIGNATURE-----