[suse-security] Firewall2 static IP mapping

["Chris Woods" <chris@xxxxxxxxxxxxxxxx>]

Here is my layout:
Useable Public IP's
200.200.200.1  webserver DNS address
200.200.200.2  open
200.200.200.3  open
200.200.200.4  open
200.200.200.5  Firewall2 Outside interface eth0
200.200.200.6  DSL modem

Private IP's
10.0.0.1      Firewall2 Inside interface eth1
10.0.0.2      webserver physical private address
10.0.0.10-20  DHCP addressing for workstations

Currently all traffic from the private network works going to the internet.
However, incoming traffic to port 80 on IP 200.200.200.1 needs to get to 10.0.0.2
and the outgoing traffic from the webserver needs to be sourced with the same IP.  I
have read many doc's and email threads and have tried many possibilities but nothing
seems to work, my head is now spinning and need some direction.

Thanks
Chris.


-- 
Check the headers for your unsubscription address
For additional commands, e-mail: suse-security-help@xxxxxxxx
Security-related bug reports go to security@xxxxxxx, not here